Concrete Repair Archives - Colorado Concrete Repair
6
archive,category,category-concrete-repair,category-6,ajax_fade,page_not_loaded,,select-theme-ver-3.2.1,vertical_menu_enabled,menu-animation-underline,wpb-js-composer js-comp-ver-4.6,vc_responsive

Surface Preparation for Concrete Coating Applications

 

Surface Preparation is Key to a Successful Coating Application

Surface preparation is arguably one of the most important tasks of the concrete coatings process. For this reason, we want to take a moment to walk you through why it is so important to prepare a surface for resinous coating adhesion and how we make sure it is done properly.

 

Why is Surface Preparation So Important?

Surface preparation is important because if it is not done right, the coating system could fail. For instance, if the moisture was not tested and there is too much moisture in the concrete prior to coating installation, or the concrete slab was not repaired or leveled, the coating may delaminate quickly. The reason our coatings last longer than other competitor’s is because of the pride and time we take in preparing the concrete surface for adhesion. In addition to this, we also use high-performance materials that may cost more upfront, but will be a longtime investment.

surface preparation

Patching and crack repairs.

How Do We Prepare the Surface for Proper Adhesion?

Our team will ensure that your concrete is prepared and repaired, so that your concrete coating will adhere. Look at the following ways we prepare the concrete prior to resinous flooring application.

  1. Repair the concrete.
    • Fill cracks with flexible joint filler.
      • Cracks generally must be bigger than a credit card width to warrant chasing them and filling them for the integrity of the concrete slab.
    • Level the concrete where needed.
      • Concrete must be as flush as possible for coatings to adhere properly.
    • Apply a cementitious layer and patch spalling concrete areas where needed.
  2. Grind, shot blast, or sandblast the concrete surface.
  3. Acid etch or mechanically prep the concrete.
    • Concrete needs to be a rough, sandpaper finish for the coating to adhere. This can be done either with acid etching or mechanical preparation.
  4. Dry mop the concrete or clean the area surface from dirt and debris.

 

surface preparation

Grinding the concrete with dust control

 

And to Sum It Up…

Once the concrete is prepared thoroughly and to industry standards, it is time to apply the resinous coating system! This is the exciting part because this is the part you get to see the result! One thing to consider before moving on, however, is in this process it is important to do proper moisture vapor testing to make sure the concrete’s moisture level is within industry standards to apply a coating. Otherwise, moisture will affect the coating’s adhesion. Also, we’ll give you our honest opinion if you would be better off replacing your concrete if we do not think we can repair it well enough for a coating to adhere properly.

Thank you for your interest in finding out how surface preparation is an important step to the concrete coating process! When you work with us, you can trust that you are in the right hands. We appreciate our clients and want to give them the best concrete flooring investment! Call us today to learn more at 720-258-6571!

 

 

Epoxy Coating for a Fort Collins City Building

Epoxy Coating Project Complete

We completed an epoxy coating project in the Fort Collins Power and Light office building this past month. The client chose to install the quarter inch Copper Mountain flake epoxy system, so that it would be easy to clean, durable to high traffic, and look good. The job was a big success! We transformed 15,000 square feet of rough and unlevel concrete that was previously carpeted into a beautiful, seamless, easy-to-clean floor. The client had decided on this application after having a previous section done and having seen how well it performed with workers walking through the area with muddy boots.

 

The Process:

Prepwork is arguably the most important part of our trade, and with this floor, we needed to focus on repairing the surface so that it would be nice and flat for the coating to adhere. We moved old pieces of concrete that had broken due to the concrete settling and cracking over time, as well as we filled a lot of cracks and grinded the surface smooth. The floor also required moisture remediation after testing. The moisture remediation consisted of a special primer needing to be installed on the floor and extensive patching to ensure adhesion of the epoxy chip coating. The prepwork laid the foundation for a nice industrial floor coating.

 

Why Epoxy?

The client chose this system to be installed in the high traffic areas, like hallways and large rooms, where people would gather and walk through often. They decided to carpet the offices, which can often be a good decision for a cozier feel for people’s workspaces. Concrete floors can be a nice addition to a mixture of flooring types, depending on what they will be used for. In this case, the city will be happy with the mixture of epoxy coating and carpet for their usage because the epoxy is industrial-strength and looks good, whereas the carpet does not get as much traffic and provides a nice environment in the office setting.

 

Some things to consider when choosing an epoxy floor application…

Whenever our clients choose an epoxy for paint, we want to be clear that there could be odors associated with the resins we use, and really, you’re going to get this with any contractor. However, there are ways to reduce the odor, which is what we did in this case. Products were selected to reduce odors because part of the building was occupied. Another thing we want our clients to be aware of is the drying times, which can be longer or shorter depending on the temperature of the concrete and surrounding environment. Depending on the material used, our clients may be able to walk on it the next day, or it could take an additional day if it did not dry quick enough. Also, be careful and consult with us before you drive any machinery on the surface when we’re finished.

 

We’d love to work with you on your next concrete coating project!

Overall, we are pleased with the outcome and look forward to help warehouses, city buildings, gymnasiums, schools, airplane hangars, large garages, pole barns, get setup with an epoxy coating like this one, or other types of concrete coatings and polished concrete. We provide free estimates after you your project has been qualified over the phone. Call us today for your free estimate at 720-258-6571. We look forward to working with you.

 

City Building Epoxy Coating  Gallery:

Check out these before and after pictures of this concrete coating project below. You’ll see some of the concrete repair, our machines that grind the concrete and collect the majority of the dust, and then the floor when it is complete! Wow! What a difference!

Concrete Lifting

Concrete Lifting in Denver, Colorado

Often times our clients will ask us to “level out” their concrete slabs due to the concrete not being even. There could be a couple different reasons for this: either their concert has sunk or it has an uneven surface. If it’s the first reason, and the concrete has sunk, concrete lifting is often the best way to address the issue. If it’s the second reason, and the concrete has an uneven surface, concrete grinding is a good solution. In this article we asked the Liftech team to tell us about their system to address sunken and unstabilized concrete. We recommend this team of professionals, who have been rated Colorado’s #1 polyurethane concrete raising and stabilization company, to all of our clients who need their concrete lifted because it’s non-invasive and works more effectively than other forms of concrete lifting.

So Why Does Concrete Sink Over Time?

The Colorado Front Range is made up of a large assortment of soil types. It ranges from very sandy soils to highly expansive clay soils with ever expanding and contracting Bentonite (Claystone). When wet, Sodium Bentonite expands, absorbing as much as several times its dry mass in water. The opposite happens when dried out.

Too often in construction, soil is not properly compacted, downspouts are not properly placed and landscaping drainage is poorly designed. When large quantities of water are directed towards any concrete slab, there is a possibility of soil erosion and or compaction. This leads to concrete settlement over time. Garage floors, basements, driveways, exterior walkways, porches and patios are the areas most frequently affected. Exterior concrete is generally poured at an angle away from any structure. This is an effort to keep water from pooling in a garage or to keep it from seeping down into a basement. When settlement occurs, and water is flowing in the wrong direction towards a house, more severe problems are likely to arise.

 

 concrete lifting

Liftech’s Concrete Lifting Solution:

Our concrete repair plan includes the controlled lift of individual slabs of concrete. We achieve a precise result by applying expansive polymer foam just beneath the surface of the slab. This process eliminates the failing condition as well as seals and stabilizes all defective joints and sources of water penetration from further erosion. The variety of soils and substrates across the Front Range are often the root of the problem. Liftech’s concrete repair system treats the soils and addresses the water and erosion issues. The average life cycle of concrete is extended at a fraction of the cost of replacement.

LIFTECH BENEFITS

  • LONG LASTING!   Polyurethane cures as a solid, impermeable structure which adheres to the concrete and is not susceptible to fracture or failure.
  • SOIL STABILIZATION!   Polyurethane is injected as a liquid and reacts within the loosely, uncompacted soils to solidify and stabilize those soils.
  • LESS INVASIVE!   Liftech uses controlled injections in penny-size holes to raise your concrete quickly and effectively.
  • LIGHTWEIGHT!   Polyurethane weighs about two pounds per cubic ft.
  • IT’S FAST!   Polyurethane cures within minutes, with your concrete ready to use again once we leave the job!
  • DEFEND AGAINST MOTHER NATURE SAFELY!   Our environmentally friendly solution creates a barrier to moisture, chemicals, insects, rodents and erosion.

 

Before and After Concrete Lifting:

Now that you can see why you need your concrete lifted and why we recommend Liftech for your next commercial or residential project, contact them here today!

 

 

Pool Deck Coating Options

pool deck coating options

Review of Pool Deck Coating Options

 

There are many different options from which to choose when it comes to repairing your pool deck, and pool deck coatings are often a cost-effective solution, especially in comparison to replacing the concrete. Pool deck coatings come in all shapes and sizes, from cheap paint-on coatings to brilliant, designer, durable coatings. We’ll explain what to look for when deciding which system is best for your project by reviewing each of the following systems: Pebble Technology, Paint, Cement-based Coatings, Vinyl Chip, and Sandbroadcast.

 

Replace Your Pool Deck or Install a Coating?

 

First, when do you know when it’s time to replace your concrete vs. install a coating? Many people tell us that their pool is probably chipping, cracking, heaving, or spalling way too much for a coating. Sometimes this is true, however, often we can install our coating system after we repair and prep the surface. This often involves: cleaning the surface, filling cracks, patching spalled surfaces, grinding the surface, and washing again to ensure the coating adheres. We can handle multiple repair issues, but sometimes it might be best to replace the concrete. We’ll give you the best recommendation, even if that means not installing a coating. An example of when the concrete should be replaced is when it is a small area, such as less than 2,000 square feet; in that case, the cost per square foot just becomes too high for the coating. Another example would be if the concrete is crumbling and there are chunks of concrete missing from the surface. This would not be an optimal surface to hold a coating, and thus should be replaced.

 

Now that you have an idea of whether you should replace your concrete or install a coating, which should prolong the life of your concrete, considering you choose a quality system and a team of experienced professionals to install it, we will discuss each system, starting with Pebble Technology, also known as Pebble Tec.

 

Overview of Pool Deck Coating Options:

 

Pebble Technology:

This is an aggregate pool finish that offers different textures and colors to create a natural environment, using small to large pebbles from around the world.

 

Pros:

  • Nature-inspired appearance
  • Slip-resistant
  • Cooler than some other coating options, like paint

 

Cons:

  • Difficult to repair
  • Tends to delaminate and peel
  • Installers not in every state, like Colorado
  • High cost
  • Traps dirt, therefore harboring bacteria

 

Concrete Paint:

Concrete paint is exactly what it sounds like; it is a paint designed for concrete pool decks. It is like painting a wall in your house, except you paint a thin layer onto the concrete, then often seal it and apply a texture for slip-resistance.

 

Pros:

  • Less expensive upfront
  • Large range of color options

 

Cons:

  • Tends to chip and peel
  • Can be slippery if texture is not added
  • Highlights flaws in the concrete
  • Looks like paint

 

Cement-based Coatings:

A cement-based coating is a polymer modified cement that is installed onto the concrete surface at about ¼ inch thick.

 

Pros:

  • Customizable look
  • Good texture when not sealed
  • Decorative appearance
  • Can hide flaws
  • Some are UV-resistant

 

Cons:

  • Usually requires a high gloss sealer, which can be slippery
  • Tends to chip, peel, and crack
  • Needs sealer applied often

 

Vinyl Chip:

Decorative vinyl chips systems, or flake systems, are resin-based chip/flake flooring systems with paint aggregates that is either applied to a pool deck with a hand broadcast or by a hopper-blower gun.

 

Pros:

  • Customizable: comes in many colors and sizes
  • Hides sub-surface imperfections
  • Colorfast, UV-stable pigments

 

Cons:

  • Can be slippery
  • Can blister

 

Sand Broadcast:

This is our unique pool deck resurfacing system that we created with years of knowledge and experience in the concrete coatings and repair industry. It takes the strength of a parking deck coating with a resin-based base layer and blends it with local quartz that is thrown by hand evenly over the surface for a natural finish.

 

Pros:

  • Slip-resistant
  • Decorative, but natural appearance
  • Cost-effective
  • Durable
  • Hides sub-surface imperfections
  • UV-resistant and chemical-resistant
  • Crack-resistant
  • Easy to maintain
  • Optional sealer

Cons:

  • More expensive upfront investment than other options

 

In summary, there are several different options you have in comparison to replacing your pool deck. By looking carefully at each of the options listed in this blog, hopefully you have a better idea on where to spend your money: repairing or replacing, and which system to use that will best fit your needs. There are benefits to each kind of system, but when deciding which pool deck coating system, keep in mind the long-term investment decision. For a better system, like the sand broadcast pool deck system, it might cost more upfront, but it will be worth it in the long run, prolonging the life of your pool deck and making it look beautiful with a flexible, high technology sandy coating that looks like you’re on the beach. Contact us to save your pool deck today at 720-258-6571!

 

 

 

Apartment Complex Pool Deck Coating

pool deck coatings

A Pool Deck Coating is a Perfect Option for Multi-family and Home Owner’s Associations!

Last week we finished a pool deck coating at an apartment complex in Westminster, Colorado. In only five days we transformed the 4,000 square foot deck into a beautiful, slip-resistant, and durable pool deck. This kept the property management company from having to rip out and replace the pool deck, which would have been more costly and would have made more of a disturbance in the daily operations.

 

Our crew was excited to do this project! The pool deck needed some patching and minor repairs here and there, and we were up for the task! We had beautiful weather and the on-site team was great to work with. Even the residents stopped by to say hi when they passed by, asking us lots of questions about their new pool deck coating. The pool deck needed repairs, however it was in good enough condition to opt for the pool deck resurface instead of replacing it. Some things to look for when deciding whether to replace the concrete or to resurface it with a brand new coating are:

  • How big are the repairs needed? Are there deep holes that are more structural issues rather than aesthetic and minor unevenness in the concrete? If so, replacing might be better. If there are just minor repairs, consider having us install a pool deck coating.
  • Do you have a time limit or budget you’re trying to meet? Our crew can repair and apply our sandbroadcast pool deck coating system in a matter of days, depending on how big the deck is at around $6-8/square foot, again, depending on the size.
  • Do you want your concrete to last longer without having to replace it? Our sandbroadcast pool deck coatings are durable, flexible, and beautiful. After we prep the concrete thoroughly, which can include washing it with a pressure washer, patching, and even grinding the concrete, we broadcast this quartz into the coating base. This base coating is high technology and is used for parking decks, so it is durable as they come. Here’s this pool deck in the preparation stage of the process:

pool deck coating

 

A Pool Deck Transformed

The residents at 9100 Vance in Westminster can now enjoy the pool when the management company re-opens it. Depending on the temperatures when we applied the system, pool users can use the pool as soon as 24 hours after the application is complete. *Check with us if you have questions about specific timing for your project. The residents will appreciate the new, crisp look, and will appreciate that it is even and slip-resistant.

pool deck coatings

 

Call us today at 720-258-6571 for your new pool deck transformation!

A Concrete Bridge Coating – Durable and Aesthetically Pleasing!

What is a Concrete Bridge Coating Anyway?

concrete bridge coating

Bridge {After}

This is a great question! Why would you want to repair your spalling and cracked bridge vs. replace it? A concrete bridge coating might be just right for your project. Certain bridges need replaced, which you can tell if you see rust near rebar or crumbling to the point of seeing the mesh or rebar underneath. However, some bridges, have more aesthetic issues, like spalling and cracks that can be addressed with our sandbroadcast deck system. Concrete bridge coatings use our tried and true parking deck system with a sandbroadcast.

How we do it:

  1. Repair the concrete and prep it (wash the concrete, and in some cases, grind the concrete; patch the spalling areas and seal the cracks)
  2. Wash the surface again and apply our industrial strength coating system in a few steps
  3. Broadcast our locally sourced quartz or quartz color of your choice

 

We, first, repair the concrete and prep it for the sandbroadcast, which can include washing the concrete, grinding in some cases, patching the spalling areas and sealing the cracks. Second, we wash the surface again and apply our industrial coating system in a few steps. We won’t get into the nitty gritty here, but feel free to ask us questions at our consultation. Mainly, we layer heavy duty, durable epoxies on the smooth, prepped concrete, and then we broadcast in our locally sourced quartz to make the finished product durable and prolong the life of the concrete for years to come. This saves you from having to replace it, which usually will cost you at least 2-4 times as much replacing the bridge vs. repairing it.

 

A Boulder Homeowner’s Choice to Repair His Bridge

Recently we applied our sandbroadcast deck system to a Boulder homeowner’s beautiful bridge. The homeowner and his family were great to work with, as it took about a week to complete and it was one of their entrances to their industrial and modern home in a most lush, beautiful setting on the outskirts of Boulder. The homeowner in this case, chose our sandbroadcast system vs. replacing his bridge because his bridge was only spalling and starting to crack (see before picture below) and it was to the point where it could be saved with our system. If he were to have replaced it, it would have cost him more money. We charged him $10/square foot to apply our whole system, giving him 5 to 10 more years at least of good use. He was very pleased with the final result. It was a little sticky a few days after the sandbroadcast was complete because of the cool weather temperatures when we were in the process of applying the system, which is to be expected, especially in the month of October for concrete coatings, such as the sandbroadcast deck system we used for his bridge.

 

The bridge looks beautiful now and it is durable as can be! The concrete bridge coating was ideal for this family’s situation. The family can drive and walk over the bridge with confidence, knowing that even the Colorado weather will have a hard time ruining this fine finish. Call us today at 720-258-6571 to discuss your project needs! A concrete bridge coating may be just the right fit for your bridge!

 

Read More Below for Why Our Pool Deck Sandbroadcast System is Also Great for Bridges!

At around $10/square foot, maybe less if you have more square footage, you can opt for a concrete bridge repair using our durable and industrial grade sandbroadcast system, the same one we use for pool decks.

Replace It or Repair It?

Why would you want to repair your spalling and cracked bridge vs. replace it? A concrete bridge coating might be just right for your project. Certain bridges need replaced, which you can tell if you see rust near rebar or crumbling to the point of seeing the mesh or rebar underneath. However, some bridges, have more aesthetic issues, like spalling and cracks that can be addressed with our sandbroadcast deck system. Concrete bridge coatings use our tried and true parking deck system with a sandbroadcast.

 

concrete bridge coating

Bridge {Before}

 

concrete bridge coating

Bridge {After}

 

concrete bridge coating

Bridge {After}

A New Pool Deck Coating for a Mountain Resort and Spa!

A Winter Park resort’s pool deck makeover, September 4-9, 2016.

Devil’s Thumb Resort and Spa has a beautiful pool and so many other amenities for families, couples, and people of all ages and places in life. Their pool in particular is expansive and has a beautiful view of Colorado’s majestic mountains. We were delighted that they chose us to repair the pool deck’s concrete surface and apply our resort pool deck coatings. We were able to save them time and energy by giving them a final product that should last them years to come! Our sandbroadcast pool deck system is perfect for commercial properties, resort and spas, HOA’s, and even some residential properties.

 

How do Colorado Concrete Repair’s resort pool deck coatings differ from other companies?

When you work with us, you are in good hands. Besides all of that though, we use top of the line materials and are extremely diligent in our prep work, as well as in the finishing steps. Our sandbroadcast system uses locally sourced, beautiful and natural Colorado quartz, however there other quartz options from which to choose. This pool deck coating is durable, crack-resistant, and chip-resistant, meaning it should last our clients years to come. The sandbroadcast makes it so the surface is slip-resistant, which gives peace of mind. The Chief Operating Officer at Devil’s Thumb worked with the board to choose our pool deck coating because there other option was to rip it out and replace it. Fortunately they asked us our opinion and we were able to give them a cost-effective solution that will give them a good return on their investment. It took us one week to deliver a minimally invasive like-new pool deck that their guests could enjoy that Friday evening after a wedding and for years to come!

 

 

Call us today to schedule your free estimate at 720-258-6571!

 

Learn more about our pool deck system below or on our pool deck coatings page…

 

Pool Deck Sandbroadcast System: Making Pool Decks Beautiful Again

Our pool deck coating system is unique! We use only the highest quality materials and our craftsmanship to turn ugly pool decks into beautiful surfaces once again with minimal interruption to business. Are you faced with a choice to replace your pool deck due to spalling and cracks on the surface?
 
pool deck coating      pool deck coating
 
 
Consider our sandbroadcast pool deck system instead. It is durable! We prep the surface by grinding and patching the areas that need addressed, and then layer on our coatings. The last step is when we broadcast sand into the durable coatings. Oh my! This system will leave you with a  beautiful pool deck for years to come, as it is crack-resistant and chip-resistant. Your guests will love it! Our sandbroadcast pool deck system is also slip-resistant, giving your pool guests good traction with the locally sourced Colorado quartz. This will ease your safety concerns and leave your guests to enjoy the pool.
 
 
 
pool deck coatings      pool deck coating
 
 
This process takes less time than replacing the pool deck and makes less of a mess and interruption to pool activities. We’ve finished a resort’s 4,000 square foot pool deck in one week. They chose to invest in a pool deck coating instead of replacing it because the cost over the additional years they will get to use the pool was well worth it! Plus, they only had to close their pool for one week. In fact, we were able to give them a finished pool deck by Friday night for a big wedding party to end their joyous day!

Our pool deck coatings are:

  1. Durable
  2. Cost-effective
  3. Crack-resistant
  4. Slip-resistant
  5. Beautiful
 
What are you waiting for? Give your pool deck to us and we’ll transform it! Call us today at 720-258-6571 for your free estimate.

Pool Deck Gallery:

 

Call us today to discuss your project needs at 720-258-6571! 

Garage Floor System

Fire Red Epoxy Garage Floor System in Denver Neighborhood

Are you looking for a new look for your garage?! We have the solution for you! Just last week we finished a garage floor system in a nice Denver neighborhood. The home owners are working to renovate their garage, where they play mini hockey games with their children, store their outdoor gear, and park their cars. They chose our garage floor system in 1/8″ Firebrick epoxy chip, which goes particularly well with their stucco and brick house. Once we were done, they told us they loved the new look. All they need to do next is paint the walls!

garage floor system

Why Choose Us to Help you Revamp Your Garage Floor?

Traditionally garage floors get a lot of wear and tear, and over time you may find that your concrete floor that was once beautiful and new, deteriorates. If your concrete garage floor is at the point of spalling, or chipping at the surface, showing aggregate beneath, it is time to call us!

We’ll first make sure your garage floor is a good candidate for our garage floor system by seeing how badly it has deteriorated. Most of the time we’ve found that garage floors, even though they look pretty bad, can be good candidates for our epoxy garage floor system. We’ll check to see if any repairs need to happen and how much prep work will take place.

Then we’ll talk with you about your choices! We use the Graniflex technology, which is durable and highly resistant to cracks. It also withstands harsh weather and vehicular and foot traffic really well. You get to choose what final look you want! We have 1/8″ chips, like in this garage, or 1/4″ chips in several colors. The most popular color is Copper Mountain, however this house looks amazing with a Fire Brick red! You can also have us sandbroadcast, which means we’ll broadcast a locally sourced sand into the mix to make a beautiful floor. Check out this page for more information about our garage floor systems!

garage floor system

We look forward to hearing from you. Call us today at 720-258-6571 if you’d like to discuss your garage flooring project needs.

Pool deck coating

Pool Deck Coating in Greenwood Village, Colorado

Pool Deck Coating

Colorado Concrete Repair finished a pool deck coating for a Greenwood Village community pool April 2016. The pool deck needed repairs before we coated it, so we went straight to work patching, grinding, and overall prepping the concrete surface, so that the coating would adhere and last a long time. The project took us one week and now the pool is ready to be used for the season. Luckily we finished it right before a spring snow storm hit!

We take pride in prepping each surface before we apply a coating or sealing the concrete. This step is arguably the most important step, because if the surface is not prepped correctly, the product(s) we apply on top may not last or adhere as well. Here’s how the pool deck looked before we put the coating on; this is the preparation part of the project.

Pool Deck Coating

Pool deck coating before Greenwood Village

Pool Deck Coating

Before pool deck coating – Greenwood Village

Our client wanted a pool deck system that was slip-resistant, looked nice, and would stand up to the water elements. He chose the Caramel Mountain 1/8″ Graniflex system, which provides ultimate flexibility and actually strengthens the surface, plus looks good.

First, we prepped and repaired the concrete surface, then we installed a primer water vapor coat, secondly a basecoat, and finally two polyaspartic topcoats. This is what the finished product looked like:

Pool deck coating

Greenwood Village Pool Deck Coating

Pool Deck Coating

Greenwood Village Pool Deck Coating

Is your pool deck ready for swim season? Call us today at 720-258-6571 to schedule a free estimate! We look forward to working with you! Check out our pool deck coatings page to read more!

Sealing Stamped Concrete

Sealing Stamped Concrete – Your Stamped Concrete Reseal Experts

Colorado Concrete Repair specializes in sealing stamped concrete. Just as a car needs maintenance, like oil changes, so does your stamped concrete need sealing. That’s where we come in! When you call us, we will set you up with an appointment to seal or reseal your stamped concrete. This same process can also be applied to any concrete slab you want to maintain.

Why is Sealing Stamped Concrete Important?

Sealing stamped concrete is important because it provides protection from wear and tear of the weather elements, mobile and foot traction, and general exposure to water and moisture. We used our favorite, a acrylic sealer on a recent residential stamped concrete sealing project in the Denver metro area. The home owner was concerned that her beautiful concrete was going to deteriorate because it was outdoors; she could even already see some crumbling here and there and wanted to get it sealed right away. She came to us for help and we were able to wash the area and then apply our penetrating sealer on the surface. She has been happy ever since – her backyard is now ready for entertaining guests with bird fountain and stamped concrete surrounding the lush landscaping, now protected.

Sealing Stamped Concrete

What kind of stamped concrete or concrete do you have that needs sealed? We would be glad to wash and seal your concrete. It only takes us a half day to seal your concrete, so call us today to set up an appointment to protect your concrete! You’ll be happy with how much cleaner your concrete will be after we wash and seal it! Call us today at 720-258-6571!

Sealing concrete is an important thing to consider when maintaining your home or your business property. Simply keeping a reseal regimen will help extend the life of your concrete. You will not need to replace it as fast as you would if it were not sealed. We look forward to talking with you about your project!